diff --git a/pub/Makefile.in b/pub/Makefile.in
index 61d45ff6ad36055a42fd68cd97d668ddee85ff8f..e299b1bea0df5e6adb4cf5ad0f453bac35828d27 100644
--- a/pub/Makefile.in
+++ b/pub/Makefile.in
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.13.3 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
esac; \
- test $$am__dry = yes; \
- }
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
@@ -49,11 +76,13 @@ NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = .
-DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(srcdir)/config.h.in \
- $(top_srcdir)/configure COPYING INSTALL build-aux/config.guess \
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+ $(top_srcdir)/configure $(am__configure_deps) \
+ $(srcdir)/config.h.in COPYING INSTALL build-aux/config.guess \
build-aux/config.sub build-aux/depcomp build-aux/install-sh \
- build-aux/ltmain.sh build-aux/missing build-aux/ylwrap
+ build-aux/missing build-aux/ylwrap build-aux/ltmain.sh \
+ $(top_srcdir)/build-aux/install-sh \
+ $(top_srcdir)/build-aux/missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -64,15 +93,28 @@ mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
SOURCES =
DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+ ctags-recursive dvi-recursive html-recursive info-recursive \
+ install-data-recursive install-dvi-recursive \
+ install-exec-recursive install-html-recursive \
+ install-info-recursive install-pdf-recursive \
+ install-ps-recursive install-recursive installcheck-recursive \
+ installdirs-recursive pdf-recursive ps-recursive \
+ tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
@@ -80,11 +122,33 @@ am__can_run_installinfo = \
esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir dist dist-all distcheck
+am__recursive_targets = \
+ $(RECURSIVE_TARGETS) \
+ $(RECURSIVE_CLEAN_TARGETS) \
+ $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+ cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+ $(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
+CSCOPE = cscope
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
@@ -95,6 +159,7 @@ am__remove_distdir = \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
@@ -122,6 +187,7 @@ am__relativize = \
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
@@ -130,6 +196,7 @@ ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
AMTAR = @AMTAR@
AM_CXXFLAGS = @AM_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -282,22 +349,25 @@ distclean-hdr:
-rm -f config.h stamp-h1
# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+ @fail=; \
+ if $(am__make_keepgoing); then \
+ failcom='fail=yes'; \
+ else \
+ failcom='exit 1'; \
+ fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
@@ -312,57 +382,12 @@ $(RECURSIVE_TARGETS):
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-$(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -378,12 +403,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ $(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
@@ -395,15 +415,11 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$$unique; \
fi; \
fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
@@ -412,9 +428,31 @@ GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+ test ! -s cscope.files \
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+ -rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(DISTFILES)
$(am__remove_distdir)
@@ -482,40 +520,36 @@ distdir: $(DISTFILES)
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
- $(am__remove_distdir)
-
-dist-lzma: distdir
- tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
+dist dist-all:
+ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+ $(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
@@ -526,8 +560,6 @@ distcheck: dist
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.lzma*) \
- lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
@@ -539,9 +571,9 @@ distcheck: dist
*.zip*) \
unzip $(distdir).zip ;;\
esac
- chmod -R a-w $(distdir); chmod u+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
+ chmod -R a-w $(distdir)
+ chmod u+w $(distdir)
+ mkdir $(distdir)/_build $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
@@ -573,7 +605,7 @@ distcheck: dist
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
@@ -707,13 +739,12 @@ ps-am:
uninstall-am:
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
- ctags-recursive install-am install-strip tags-recursive
+.MAKE: $(am__recursive_targets) all install-am install-strip
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am am--refresh check check-am clean clean-generic \
- ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
- dist-lzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+ am--refresh check check-am clean clean-cscope clean-generic \
+ cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
+ dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
distcheck distclean distclean-generic distclean-hdr \
distclean-tags distcleancheck distdir distuninstallcheck dvi \
dvi-am html html-am info info-am install install-am \
@@ -723,8 +754,8 @@ uninstall-am:
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs installdirs-am \
maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \
- uninstall uninstall-am
+ mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
+ uninstall-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
diff --git a/pub/aclocal.m4 b/pub/aclocal.m4
index 30941788d63d739cdc6488936a54f4015d4c76e9..72a141960fcaeaa292877e596c5c859100a0d2e2 100644
--- a/pub/aclocal.m4
+++ b/pub/aclocal.m4
@@ -1,8 +1,7 @@
-# generated automatically by aclocal 1.11.6 -*- Autoconf -*-
+# generated automatically by aclocal 1.13.3 -*- Autoconf -*-
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
-# Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -12,33 +11,31 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
[m4_warning([this file was generated for autoconf 2.69.
You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.])])
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 2002-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 1
-
# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.11'
+[am__api_version='1.13'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.11.6], [],
+m4_if([$1], [1.13.3], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
@@ -54,24 +51,22 @@ m4_define([_AM_AUTOCONF_VERSION], [])
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.6])dnl
+[AM_AUTOMAKE_VERSION([1.13.3])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 1
-
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory. The problem is that $srcdir (and
@@ -90,7 +85,7 @@ _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
+# harmless because $srcdir is '.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
@@ -116,22 +111,19 @@ am_aux_dir=`cd $ac_aux_dir && pwd`
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 9
-
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])dnl
AC_SUBST([$1_FALSE])dnl
_AM_SUBST_NOTMAKE([$1_TRUE])dnl
@@ -150,16 +142,14 @@ AC_CONFIG_COMMANDS_PRE(
Usually this means the macro was only invoked conditionally.]])
fi])])
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009,
-# 2010, 2011 Free Software Foundation, Inc.
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 12
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery. Also note that it means that autoscan, seeing
@@ -169,7 +159,7 @@ fi])])
# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
@@ -182,12 +172,13 @@ AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl
-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
- [$1], CXX, [depcc="$CXX" am_compiler_list=],
- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], UPC, [depcc="$UPC" am_compiler_list=],
- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
+m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
+ [$1], [CXX], [depcc="$CXX" am_compiler_list=],
+ [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+ [$1], [UPC], [depcc="$UPC" am_compiler_list=],
+ [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
AC_CACHE_CHECK([dependency style of $depcc],
[am_cv_$1_dependencies_compiler_type],
@@ -195,8 +186,8 @@ AC_CACHE_CHECK([dependency style of $depcc],
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
rm -rf conftest.dir
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
@@ -236,16 +227,16 @@ AC_CACHE_CHECK([dependency style of $depcc],
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
am__obj=sub/conftest.${OBJEXT-o}
am__minus_obj="-o $am__obj"
case $depmode in
@@ -254,8 +245,8 @@ AC_CACHE_CHECK([dependency style of $depcc],
test "$am__universal" = false || continue
;;
nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
if test "x$enable_dependency_tracking" = xyes; then
continue
else
@@ -263,7 +254,7 @@ AC_CACHE_CHECK([dependency style of $depcc],
fi
;;
msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok `-c -o', but also, the minuso test has
+ # This compiler won't grok '-c -o', but also, the minuso test has
# not run yet. These depmodes are late enough in the game, and
# so weak that their functioning should not be impacted.
am__obj=conftest.${OBJEXT-o}
@@ -311,7 +302,7 @@ AM_CONDITIONAL([am__fastdep$1], [
# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
AC_DEFUN([AM_SET_DEPDIR],
[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
@@ -321,9 +312,13 @@ AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[ --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors])
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+ [--enable-dependency-tracking],
+ [do not reject slow dependency extractors])
+AS_HELP_STRING(
+ [--disable-dependency-tracking],
+ [speeds up one-time build])])
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
@@ -338,20 +333,18 @@ _AM_SUBST_NOTMAKE([am__nodep])dnl
# Generate code to set up dependency tracking. -*- Autoconf -*-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-#serial 5
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
[{
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
case $CONFIG_FILES in
@@ -364,7 +357,7 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
# Strip MF so we end up with the name of the file.
mf=`echo "$mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
+ # We used to match only the files named 'Makefile.in', but
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
@@ -376,21 +369,19 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
continue
fi
# Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
+ # from the Makefile without running 'make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
+ test -z "$am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
# simplest approach to changing $(DEPDIR) to its actual value in the
# expansion.
for file in `sed -n "
s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
fdir=`AS_DIRNAME(["$file"])`
@@ -408,7 +399,7 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
# This macro should only be invoked once -- use via AC_REQUIRE.
#
# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each `.P' file that we will
+# is enabled. FIXME. This creates each '.P' file that we will
# need in order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
@@ -418,15 +409,12 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
# Do all the work for Automake. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 16
-
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
@@ -442,7 +430,7 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
+[AC_PREREQ([2.65])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
@@ -471,31 +459,40 @@ AC_SUBST([CYGPATH_W])
# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+[AC_DIAGNOSE([obsolete],
+ [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+m4_if(
+ m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+ [ok:ok],,
[m4_fatal([AC_INIT should be called with package and version arguments])])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
@@ -506,28 +503,32 @@ _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
[_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+ [_AM_DEPENDENCIES([CC])],
+ [m4_define([AC_PROG_CC],
+ m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+ [_AM_DEPENDENCIES([CXX])],
+ [m4_define([AC_PROG_CXX],
+ m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES(OBJC)],
- [define([AC_PROG_OBJC],
- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+ [_AM_DEPENDENCIES([OBJC])],
+ [m4_define([AC_PROG_OBJC],
+ m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+ [_AM_DEPENDENCIES([OBJCXX])],
+ [m4_define([AC_PROG_OBJCXX],
+ m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
AC_CONFIG_COMMANDS_PRE(dnl
[m4_provide_if([_AM_COMPILER_EXEEXT],
[AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
])
-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
dnl mangled by Autoconf and run in a shell conditional statement.
m4_define([_AC_COMPILER_EXEEXT],
@@ -555,15 +556,12 @@ for _am_header in $config_headers :; do
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation,
-# Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 1
-
# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
@@ -577,16 +575,14 @@ if test x"${install_sh}" != xset; then
install_sh="\${SHELL} $am_aux_dir/install-sh"
esac
fi
-AC_SUBST(install_sh)])
+AC_SUBST([install_sh])])
-# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2003-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 2
-
# Check whether the underlying file-system supports filenames
# with a leading dot. For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
@@ -602,14 +598,12 @@ AC_SUBST([am__leading_dot])])
# Check to see how 'make' treats includes. -*- Autoconf -*-
-# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 4
-
# AM_MAKE_INCLUDE()
# -----------------
# Check to see how make treats includes.
@@ -627,7 +621,7 @@ am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
+# Ignore all kinds of additional output from 'make'.
case `$am_make -s -f confmf 2> /dev/null` in #(
*the\ am__doit\ target*)
am__include=include
@@ -654,15 +648,12 @@ rm -f confinc confmf
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 6
-
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
@@ -670,11 +661,10 @@ AC_DEFUN([AM_MISSING_PROG],
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])
-
# AM_MISSING_HAS_RUN
# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([missing])dnl
@@ -687,54 +677,22 @@ if test x"${MISSING+set}" != xset; then
esac
fi
# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
else
am_missing_run=
- AC_MSG_WARN([`missing' script is too old or missing])
+ AC_MSG_WARN(['missing' script is too old or missing])
fi
])
-# Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation,
-# Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
- [[\\/$]]* | ?:[[\\/]]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
# Helper functions for option handling. -*- Autoconf -*-
-# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software
-# Foundation, Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 5
-
# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
@@ -744,7 +702,7 @@ AC_DEFUN([_AM_MANGLE_OPTION],
# --------------------
# Set option NAME. Presently that only means defining a flag for this option.
AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
# _AM_SET_OPTIONS(OPTIONS)
# ------------------------
@@ -760,22 +718,16 @@ AC_DEFUN([_AM_IF_OPTION],
# Check to make sure that the build environment is sane. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 5
-
# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
# Reject unsafe characters in $srcdir or the absolute working directory
# name. Accept space and tab only in the latter.
am_lf='
@@ -786,32 +738,40 @@ case `pwd` in
esac
case $srcdir in
*[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
- AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+ AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
esac
-# Do `set' in a subshell so we don't clobber the current shell's
+# Do 'set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- rm -f conftest.file
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
-
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+ alias in your environment])
+ fi
+ if test "$[2]" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
test "$[2]" = conftest.file
)
then
@@ -821,46 +781,118 @@ else
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
-AC_MSG_RESULT(yes)])
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+ [AC_MSG_CHECKING([that generated files are newer than configure])
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
-# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
+# Copyright (C) 2009-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 1
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+ [--enable-silent-rules],
+ [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+ [--disable-silent-rules],
+ [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+ [am_cv_make_support_nested_variables],
+ [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+ dnl Using '$V' instead of '$(V)' breaks IRIX make.
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
# AM_PROG_INSTALL_STRIP
# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
+# One issue with vendor 'install' (even GNU) is that you can't
# specify the program used to strip binaries. This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
+# always use install-sh in "make install-strip", and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
-# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc.
+# Copyright (C) 2006-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 3
-
# _AM_SUBST_NOTMAKE(VARIABLE)
# ---------------------------
# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
@@ -874,18 +906,16 @@ AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
# Check how to create a tarball. -*- Autoconf -*-
-# Copyright (C) 2004, 2005, 2012 Free Software Foundation, Inc.
+# Copyright (C) 2004-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 2
-
# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
#
# Substitute a variable $(am__tar) that is a command
# writing to stdout a FORMAT-tarball containing the directory
@@ -895,76 +925,114 @@ AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
+#
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AC_SUBST([AMTAR], ['$${TAR-tar}'])
-m4_if([$1], [v7],
- [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
+
+# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+ [m4_case([$1],
+ [ustar],
+ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+ if test $am_uid -le $am_max_uid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi
+ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+ if test $am_gid -le $am_max_gid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi],
+
+ [pax],
+ [],
+
+ [m4_fatal([Unknown tar format])])
+
+ AC_MSG_CHECKING([how to create a $1 tar archive])
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
- # tar/untar a dummy directory, and stop if the command works
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ AM_RUN_LOG([cat conftest.dir/file])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
diff --git a/pub/build-aux/depcomp b/pub/build-aux/depcomp
index 25a39e6cd5c82d7276f6ccc62ef5e7ba1cc9776f..4ebd5b3a2f2d689de95251c9424e2763aa159de5 100755
--- a/pub/build-aux/depcomp
+++ b/pub/build-aux/depcomp
@@ -1,10 +1,9 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2012-03-27.16; # UTC
+scriptversion=2013-05-30.07; # UTC
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -28,9 +27,9 @@ scriptversion=2012-03-27.16; # UTC
case $1 in
'')
- echo "$0: No command. Try '$0 --help' for more information." 1>&2
- exit 1;
- ;;
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
@@ -57,11 +56,65 @@ EOF
;;
esac
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'. Note that this directory component will
+# be either empty or ending with a '/' character. This is deliberate.
+set_dir_from ()
+{
+ case $1 in
+ */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+ *) dir=;;
+ esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+ base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+ echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+ # If the compiler actually managed to produce a dependency file,
+ # post-process it.
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form 'foo.o: dependency.h'.
+ # Do two passes, one to just change these to
+ # $object: dependency.h
+ # and one to simply output
+ # dependency.h:
+ # which is needed to avoid the deleted-header problem.
+ { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+ sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+ } > "$depfile"
+ rm -f "$tmpdepfile"
+ else
+ make_dummy_depfile
+ fi
+}
+
# A tabulation character.
tab=' '
# A newline character.
nl='
'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
@@ -75,6 +128,9 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
@@ -86,32 +142,32 @@ if test "$depmode" = hp; then
fi
if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
fi
cygpath_u="cygpath -u -f -"
if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvisualcpp
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvisualcpp
fi
if test "$depmode" = msvc7msys; then
- # This is just like msvc7 but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvc7
+ # This is just like msvc7 but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvc7
fi
if test "$depmode" = xlc; then
- # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
- gccflag=-qmakedep=gcc,-MF
- depmode=gcc
+ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+ gccflag=-qmakedep=gcc,-MF
+ depmode=gcc
fi
case "$depmode" in
@@ -134,8 +190,7 @@ gcc3)
done
"$@"
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
@@ -143,13 +198,17 @@ gcc3)
;;
gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
+## -MM, not -M (despite what the docs say). Also, it might not be
+## supported by the other compilers which use the 'gcc' depmode.
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
@@ -157,15 +216,14 @@ gcc)
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
+ # The second -e expression handles DOS-style file names with drive
+ # letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the "deleted header file" problem.
@@ -174,15 +232,15 @@ gcc)
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
- tr ' ' "$nl" < "$tmpdepfile" |
## Some versions of gcc put a space before the ':'. On the theory
## that the space means something, we add a space to the output as
## well. hp depmode also adds that space, but also prefixes the VPATH
## to the object. Take care to not repeat it in the output.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -200,8 +258,7 @@ sgi)
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
@@ -209,7 +266,6 @@ sgi)
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
-
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
@@ -217,19 +273,15 @@ sgi)
# the IRIX cc adds comments like '#:fec' to the end of the
# dependency line.
tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr "$nl" ' ' >> "$depfile"
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+ | tr "$nl" ' ' >> "$depfile"
echo >> "$depfile"
-
# The second pass generates a dummy entry for each header file.
tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> "$depfile"
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> "$depfile"
else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
+ make_dummy_depfile
fi
rm -f "$tmpdepfile"
;;
@@ -247,9 +299,8 @@ aix)
# current directory. Also, the AIX compiler puts '$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ set_dir_from "$object"
+ set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.u
tmpdepfile2=$base.u
@@ -262,9 +313,7 @@ aix)
"$@" -M
fi
stat=$?
-
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
@@ -273,65 +322,113 @@ aix)
do
test -f "$tmpdepfile" && break
done
- if test -f "$tmpdepfile"; then
- # Each line is of the form 'foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
+ aix_post_process_depfile
+ ;;
+
+tcc)
+ # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+ # FIXME: That version still under development at the moment of writing.
+ # Make that this statement remains true also for stable, released
+ # versions.
+ # It will wrap lines (doesn't matter whether long or short) with a
+ # trailing '\', as in:
+ #
+ # foo.o : \
+ # foo.c \
+ # foo.h \
+ #
+ # It will put a trailing '\' even on the last line, and will use leading
+ # spaces rather than leading tabs (at least since its commit 0394caf7
+ # "Emit spaces for -MD").
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
fi
+ rm -f "$depfile"
+ # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+ # We have to change lines of the first kind to '$object: \'.
+ sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+ # And for each line of the second kind, we have to emit a 'dep.h:'
+ # dummy dependency, to avoid the deleted-header problem.
+ sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
-icc)
- # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
- # However on
- # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
- # ICC 7.0 will fill foo.d with something like
- # foo.o: sub/foo.c
- # foo.o: sub/foo.h
- # which is wrong. We want
- # sub/foo.o: sub/foo.c
- # sub/foo.o: sub/foo.h
- # sub/foo.c:
- # sub/foo.h:
- # ICC 7.1 will output
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file. A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+ # Portland's C compiler understands '-MD'.
+ # Will always output deps to 'file.d' where file is the root name of the
+ # source file under compilation, even if file resides in a subdirectory.
+ # The object file name does not affect the name of the '.d' file.
+ # pgcc 10.2 will output
# foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using '\':
+ # and will wrap long lines using '\' :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
- # tcc 0.9.26 (FIXME still under development at the moment of writing)
- # will emit a similar output, but also prepend the continuation lines
- # with horizontal tabulation characters.
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
+ set_dir_from "$object"
+ # Use the source, not the object, to determine the base name, since
+ # that's sadly what pgcc will do too.
+ set_base_from "$source"
+ tmpdepfile=$base.d
+
+ # For projects that build the same source file twice into different object
+ # files, the pgcc approach of using the *source* file root name can cause
+ # problems in parallel builds. Use a locking strategy to avoid stomping on
+ # the same $tmpdepfile.
+ lockdir=$base.d-lock
+ trap "
+ echo '$0: caught signal, cleaning up...' >&2
+ rmdir '$lockdir'
+ exit 1
+ " 1 2 13 15
+ numtries=100
+ i=$numtries
+ while test $i -gt 0; do
+ # mkdir is a portable test-and-set.
+ if mkdir "$lockdir" 2>/dev/null; then
+ # This process acquired the lock.
+ "$@" -MD
+ stat=$?
+ # Release the lock.
+ rmdir "$lockdir"
+ break
+ else
+ # If the lock is being held by a different process, wait
+ # until the winning process is done or we timeout.
+ while test -d "$lockdir" && test $i -gt 0; do
+ sleep 1
+ i=`expr $i - 1`
+ done
+ fi
+ i=`expr $i - 1`
+ done
+ trap - 1 2 13 15
+ if test $i -le 0; then
+ echo "$0: failed to acquire lock after $numtries attempts" >&2
+ echo "$0: check lockdir '$lockdir'" >&2
+ exit 1
+ fi
+
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
- # Each line is of the form 'foo.o: dependent.h',
- # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
# Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \
- < "$tmpdepfile" > "$depfile"
- sed '
- s/[ '"$tab"'][ '"$tab"']*/ /g
- s/^ *//
- s/ *\\*$//
- s/^[^:]*: *//
- /^$/d
- /:$/d
- s/$/ :/
- ' < "$tmpdepfile" >> "$depfile"
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -342,9 +439,8 @@ hp2)
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ set_dir_from "$object"
+ set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
@@ -355,8 +451,7 @@ hp2)
"$@" +Maked
fi
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
@@ -366,76 +461,61 @@ hp2)
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
# Add 'dependent.h:' lines.
sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
else
- echo "#dummy" > "$depfile"
+ make_dummy_depfile
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in 'foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- # With Tru64 cc, shared objects can also be used to make a
- # static library. This mechanism is used in libtool 1.4 series to
- # handle both shared and static libraries in a single compilation.
- # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
- #
- # With libtool 1.5 this exception was removed, and libtool now
- # generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
- tmpdepfile2=$dir$base.o.d # libtool 1.5
- tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
- tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.o.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- tmpdepfile4=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in 'foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ set_dir_from "$object"
+ set_base_from "$object"
+
+ if test "$libtool" = yes; then
+ # Libtool generates 2 separate objects for the 2 libraries. These
+ # two compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir$base.o.d # libtool 1.5
+ tmpdepfile2=$dir.libs/$base.o.d # Likewise.
+ tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ # Same post-processing that is required for AIX mode.
+ aix_post_process_depfile
+ ;;
msvc7)
if test "$libtool" = yes; then
@@ -446,8 +526,7 @@ msvc7)
"$@" $showIncludes > "$tmpdepfile"
stat=$?
grep -v '^Note: including file: ' "$tmpdepfile"
- if test "$stat" = 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
@@ -473,6 +552,7 @@ $ {
G
p
}' >> "$depfile"
+ echo >> "$depfile" # make sure the fragment doesn't end with a backslash
rm -f "$tmpdepfile"
;;
@@ -524,13 +604,14 @@ dashmstdout)
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
"$@" $dashmflag |
- sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
+ sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
- tr ' ' "$nl" < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this sed invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -583,10 +664,12 @@ makedepend)
# makedepend may prepend the VPATH from the source file name to the object.
# No need to regex-escape $object, excess matching of '.' is harmless.
sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process the last invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed '1,2d' "$tmpdepfile" \
+ | tr ' ' "$nl" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
@@ -622,10 +705,10 @@ cpp)
esac
done
- "$@" -E |
- sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
+ "$@" -E \
+ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ | sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
@@ -657,15 +740,15 @@ msvisualcpp)
shift
;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
+ set fnord "$@"
+ shift
+ shift
+ ;;
*)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
esac
done
"$@" -E 2>/dev/null |
diff --git a/pub/build-aux/install-sh b/pub/build-aux/install-sh
index a9244eb0786534553fdd9eb0050bb4b172bad0a3..377bb8687ffe16bfc79ea25c8667cabf72aaf2c2 100755
--- a/pub/build-aux/install-sh
+++ b/pub/build-aux/install-sh
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2011-01-19.21; # UTC
+scriptversion=2011-11-20.07; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,7 +35,7 @@ scriptversion=2011-01-19.21; # UTC
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
@@ -156,7 +156,7 @@ while test $# -ne 0; do
-s) stripcmd=$stripprog;;
-t) dst_arg=$2
- # Protect names problematic for `test' and other utilities.
+ # Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
@@ -190,7 +190,7 @@ if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
fi
shift # arg
dst_arg=$arg
- # Protect names problematic for `test' and other utilities.
+ # Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
@@ -202,7 +202,7 @@ if test $# -eq 0; then
echo "$0: no input file specified." >&2
exit 1
fi
- # It's OK to call `install-sh -d' without argument.
+ # It's OK to call 'install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
@@ -240,7 +240,7 @@ fi
for src
do
- # Protect names problematic for `test' and other utilities.
+ # Protect names problematic for 'test' and other utilities.
case $src in
-* | [=\(\)!]) src=./$src;;
esac
@@ -354,7 +354,7 @@ do
if test -z "$dir_arg" || {
# Check for POSIX incompatibilities with -m.
# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writeable bit of parent directory when it shouldn't.
+ # other-writable bit of parent directory when it shouldn't.
# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
ls_ld_tmpdir=`ls -ld "$tmpdir"`
case $ls_ld_tmpdir in
diff --git a/pub/build-aux/missing b/pub/build-aux/missing
index 86a8fc31e3c2aa268688a5be47d161c586772e78..cdea514931f558be2bcc47ef2d52e14ab395520b 100755
--- a/pub/build-aux/missing
+++ b/pub/build-aux/missing
@@ -1,11 +1,10 @@
#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
+# Common wrapper for a few potentially missing GNU programs.
-scriptversion=2012-01-06.13; # UTC
+scriptversion=2012-06-26.16; # UTC
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -26,68 +25,40 @@ scriptversion=2012-01-06.13; # UTC
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
+ echo 1>&2 "Try '$0 --help' for more information"
exit 1
fi
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
+case $1 in
-msg="missing on your system"
+ --is-lightweight)
+ # Used by our autoconf macros to check whether the available missing
+ # script is modern enough.
+ exit 0
+ ;;
-case $1 in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
- ;;
+ --run)
+ # Back-compat with the calling convention used by older automake.
+ shift
+ ;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
- autom4te touch the output file, or create a stub one
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+ aclocal autoconf autoheader autom4te automake makeinfo
+ bison yacc flex lex help2man
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
Send bug reports to <bug-automake@gnu.org>."
exit $?
@@ -99,228 +70,141 @@ Send bug reports to <bug-automake@gnu.org>."
;;
-*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
+ echo 1>&2 "$0: unknown '$1' option"
+ echo 1>&2 "Try '$0 --help' for more information"
exit 1
;;
esac
-# normalize program name to check for.
-program=`echo "$1" | sed '
- s/^gnu-//; t
- s/^gnu//; t
- s/^g//; t'`
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program). This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
- lex*|yacc*)
- # Not GNU programs, they don't have --version.
- ;;
-
- *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running `$TOOL --version' or `$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
- fi
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
- aclocal*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case $f in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te*)
- echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
- You might have modified some files without having the
- proper tools for further handling them.
- You can get \`$1' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison*|yacc*)
- echo 1>&2 "\
-WARNING: \`$1' $msg. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
- eval LASTARG=\${$#}
- case $LASTARG in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if test ! -f y.tab.h; then
- echo >y.tab.h
- fi
- if test ! -f y.tab.c; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex*|flex*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
- rm -f lex.yy.c
- if test $# -ne 1; then
- eval LASTARG=\${$#}
- case $LASTARG in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if test ! -f lex.yy.c; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit $?
- fi
- ;;
-
- makeinfo*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
- # The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -z "$file"; then
- # ... or it is the one specified with @setfilename ...
- infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
- # ... or it is derived from the source name (dir/f.texi becomes f.info)
- test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
- fi
- # If the file does not exist, the user really needs makeinfo;
- # let's fail without touching anything.
- test -f $file || exit 1
- touch $file
- ;;
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch. This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+ msg="probably too old"
+elif test $st -eq 127; then
+ # Program was missing.
+ msg="missing on your system"
+else
+ # Program was found and executed, but failed. Give up.
+ exit $st
+fi
- *)
- echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
- You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+ case $1 in
+ aclocal|automake)
+ echo "The '$1' program is part of the GNU Automake package:"
+ echo "<$gnu_software_URL/automake>"
+ echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/autoconf>"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ autoconf|autom4te|autoheader)
+ echo "The '$1' program is part of the GNU Autoconf package:"
+ echo "<$gnu_software_URL/autoconf/>"
+ echo "It also requires GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ esac
+}
+
+give_advice ()
+{
+ # Normalize program name to check for.
+ normalized_program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+ printf '%s\n' "'$1' is $msg."
+
+ configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+ case $normalized_program in
+ autoconf*)
+ echo "You should only need it if you modified 'configure.ac',"
+ echo "or m4 files included by it."
+ program_details 'autoconf'
+ ;;
+ autoheader*)
+ echo "You should only need it if you modified 'acconfig.h' or"
+ echo "$configure_deps."
+ program_details 'autoheader'
+ ;;
+ automake*)
+ echo "You should only need it if you modified 'Makefile.am' or"
+ echo "$configure_deps."
+ program_details 'automake'
+ ;;
+ aclocal*)
+ echo "You should only need it if you modified 'acinclude.m4' or"
+ echo "$configure_deps."
+ program_details 'aclocal'
+ ;;
+ autom4te*)
+ echo "You might have modified some maintainer files that require"
+ echo "the 'automa4te' program to be rebuilt."
+ program_details 'autom4te'
+ ;;
+ bison*|yacc*)
+ echo "You should only need it if you modified a '.y' file."
+ echo "You may want to install the GNU Bison package:"
+ echo "<$gnu_software_URL/bison/>"
+ ;;
+ lex*|flex*)
+ echo "You should only need it if you modified a '.l' file."
+ echo "You may want to install the Fast Lexical Analyzer package:"
+ echo "<$flex_URL>"
+ ;;
+ help2man*)
+ echo "You should only need it if you modified a dependency" \
+ "of a man page."
+ echo "You may want to install the GNU Help2man package:"
+ echo "<$gnu_software_URL/help2man/>"
;;
-esac
-
-exit 0
+ makeinfo*)
+ echo "You should only need it if you modified a '.texi' file, or"
+ echo "any other file indirectly affecting the aspect of the manual."
+ echo "You might want to install the Texinfo package:"
+ echo "<$gnu_software_URL/texinfo/>"
+ echo "The spurious makeinfo call might also be the consequence of"
+ echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+ echo "want to install GNU make:"
+ echo "<$gnu_software_URL/make/>"
+ ;;
+ *)
+ echo "You might have modified some files without having the proper"
+ echo "tools for further handling them. Check the 'README' file, it"
+ echo "often tells you about the needed prerequisites for installing"
+ echo "this package. You may also peek at any GNU archive site, in"
+ echo "case some other package contains this missing '$1' program."
+ ;;
+ esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+ -e '2,$s/^/ /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
diff --git a/pub/build-aux/ylwrap b/pub/build-aux/ylwrap
index 92536350cba49fa4cc8e76c1655488b5924a5c82..1c4d77612c57115342fc14a86ab853a7d026b05b 100755
--- a/pub/build-aux/ylwrap
+++ b/pub/build-aux/ylwrap
@@ -1,10 +1,9 @@
#! /bin/sh
# ylwrap - wrapper for lex/yacc invocations.
-scriptversion=2011-08-25.18; # UTC
+scriptversion=2012-12-21.17; # UTC
-# Copyright (C) 1996, 1997, 1998, 1999, 2001, 2002, 2003, 2004, 2005,
-# 2007, 2009, 2010, 2011 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
#
# Written by Tom Tromey <tromey@cygnus.com>.
#
@@ -30,9 +29,41 @@ scriptversion=2011-08-25.18; # UTC
# bugs to <bug-automake@gnu.org> or send patches to
# <automake-patches@gnu.org>.
+get_dirname ()
+{
+ case $1 in
+ */*|*\\*) printf '%s\n' "$1" | sed -e 's|\([\\/]\)[^\\/]*$|\1|';;
+ # Otherwise, we want the empty string (not ".").
+ esac
+}
+
+# guard FILE
+# ----------
+# The CPP macro used to guard inclusion of FILE.
+guard()
+{
+ printf '%s\n' "$1" \
+ | sed \
+ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \
+ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g' \
+ -e 's/__*/_/g'
+}
+
+# quote_for_sed [STRING]
+# ----------------------
+# Return STRING (or stdin) quoted to be used as a sed pattern.
+quote_for_sed ()
+{
+ case $# in
+ 0) cat;;
+ 1) printf '%s\n' "$1";;
+ esac \
+ | sed -e 's|[][\\.*]|\\&|g'
+}
+
case "$1" in
'')
- echo "$0: No files given. Try \`$0 --help' for more information." 1>&2
+ echo "$0: No files given. Try '$0 --help' for more information." 1>&2
exit 1
;;
--basedir)
@@ -67,6 +98,8 @@ esac
# The input.
input="$1"
shift
+# We'll later need for a correct munging of "#line" directives.
+input_sub_rx=`get_dirname "$input" | quote_for_sed`
case "$input" in
[\\/]* | ?:[\\/]*)
# Absolute path; do nothing.
@@ -76,15 +109,47 @@ case "$input" in
input="`pwd`/$input"
;;
esac
+input_rx=`get_dirname "$input" | quote_for_sed`
+
+# Since DOS filename conventions don't allow two dots,
+# the DOS version of Bison writes out y_tab.c instead of y.tab.c
+# and y_tab.h instead of y.tab.h. Test to see if this is the case.
+y_tab_nodot=false
+if test -f y_tab.c || test -f y_tab.h; then
+ y_tab_nodot=true
+fi
+
+# The parser itself, the first file, is the destination of the .y.c
+# rule in the Makefile.
+parser=$1
+
+# A sed program to s/FROM/TO/g for all the FROM/TO so that, for
+# instance, we rename #include "y.tab.h" into #include "parse.h"
+# during the conversion from y.tab.c to parse.c.
+sed_fix_filenames=
+
+# Also rename header guards, as Bison 2.7 for instance uses its header
+# guard in its implementation file.
+sed_fix_header_guards=
-pairlist=
while test "$#" -ne 0; do
if test "$1" = "--"; then
shift
break
fi
- pairlist="$pairlist $1"
+ from=$1
+ # Handle y_tab.c and y_tab.h output by DOS
+ if $y_tab_nodot; then
+ case $from in
+ "y.tab.c") from=y_tab.c;;
+ "y.tab.h") from=y_tab.h;;
+ esac
+ fi
shift
+ to=$1
+ shift
+ sed_fix_filenames="${sed_fix_filenames}s|"`quote_for_sed "$from"`"|$to|g;"
+ sed_fix_header_guards="${sed_fix_header_guards}s|"`guard "$from"`"|"`guard "$to"`"|g;"
done
# The program to run.
@@ -115,98 +180,56 @@ esac
ret=$?
if test $ret -eq 0; then
- set X $pairlist
- shift
- first=yes
- # Since DOS filename conventions don't allow two dots,
- # the DOS version of Bison writes out y_tab.c instead of y.tab.c
- # and y_tab.h instead of y.tab.h. Test to see if this is the case.
- y_tab_nodot="no"
- if test -f y_tab.c || test -f y_tab.h; then
- y_tab_nodot="yes"
- fi
-
- # The directory holding the input.
- input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'`
- # Quote $INPUT_DIR so we can use it in a regexp.
- # FIXME: really we should care about more than `.' and `\'.
- input_rx=`echo "$input_dir" | sed 's,\\\\,\\\\\\\\,g;s,\\.,\\\\.,g'`
-
- while test "$#" -ne 0; do
- from="$1"
- # Handle y_tab.c and y_tab.h output by DOS
- if test $y_tab_nodot = "yes"; then
- if test $from = "y.tab.c"; then
- from="y_tab.c"
- else
- if test $from = "y.tab.h"; then
- from="y_tab.h"
- fi
- fi
- fi
+ for from in *
+ do
+ to=`printf '%s\n' "$from" | sed "$sed_fix_filenames"`
if test -f "$from"; then
# If $2 is an absolute path name, then just use that,
- # otherwise prepend `../'.
- case "$2" in
- [\\/]* | ?:[\\/]*) target="$2";;
- *) target="../$2";;
+ # otherwise prepend '../'.
+ case $to in
+ [\\/]* | ?:[\\/]*) target=$to;;
+ *) target="../$to";;
esac
- # We do not want to overwrite a header file if it hasn't
- # changed. This avoid useless recompilations. However the
- # parser itself (the first file) should always be updated,
- # because it is the destination of the .y.c rule in the
- # Makefile. Divert the output of all other files to a temporary
- # file so we can compare them to existing versions.
- if test $first = no; then
+ # Do not overwrite unchanged header files to avoid useless
+ # recompilations. Always update the parser itself: it is the
+ # destination of the .y.c rule in the Makefile. Divert the
+ # output of all other files to a temporary file so we can
+ # compare them to existing versions.
+ if test $from != $parser; then
realtarget="$target"
- target="tmp-`echo $target | sed s/.*[\\/]//g`"
+ target=tmp-`printf '%s\n' "$target" | sed 's|.*[\\/]||g'`
fi
- # Edit out `#line' or `#' directives.
- #
- # We don't want the resulting debug information to point at
- # an absolute srcdir; it is better for it to just mention the
- # .y file with no path.
- #
- # We want to use the real output file name, not yy.lex.c for
- # instance.
- #
- # We want the include guards to be adjusted too.
- FROM=`echo "$from" | sed \
- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
- -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
- TARGET=`echo "$2" | sed \
- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
- -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
-
- sed -e "/^#/!b" -e "s,$input_rx,," -e "s,$from,$2," \
- -e "s,$FROM,$TARGET," "$from" >"$target" || ret=$?
-
- # Check whether header files must be updated.
- if test $first = no; then
+
+ # Munge "#line" or "#" directives. Don't let the resulting
+ # debug information point at an absolute srcdir. Use the real
+ # output file name, not yy.lex.c for instance. Adjust the
+ # include guards too.
+ sed -e "/^#/!b" \
+ -e "s|$input_rx|$input_sub_rx|" \
+ -e "$sed_fix_filenames" \
+ -e "$sed_fix_header_guards" \
+ "$from" >"$target" || ret=$?
+
+ # Check whether files must be updated.
+ if test "$from" != "$parser"; then
if test -f "$realtarget" && cmp -s "$realtarget" "$target"; then
- echo "$2" is unchanged
+ echo "$to is unchanged"
rm -f "$target"
else
- echo updating "$2"
+ echo "updating $to"
mv -f "$target" "$realtarget"
fi
fi
else
- # A missing file is only an error for the first file. This
- # is a blatant hack to let us support using "yacc -d". If -d
- # is not specified, we don't want an error when the header
- # file is "missing".
- if test $first = yes; then
+ # A missing file is only an error for the parser. This is a
+ # blatant hack to let us support using "yacc -d". If -d is not
+ # specified, don't fail when the header file is "missing".
+ if test "$from" = "$parser"; then
ret=1
fi
fi
- shift
- shift
- first=no
done
-else
- ret=$?
fi
# Remove the directory.
diff --git a/pub/configure b/pub/configure
index c5f84cc30f7e7adb12cfc5fe1e13c6601eb9a231..93a5978d30efe1ffd7f5d55cdd3420158979b7ed 100755
--- a/pub/configure
+++ b/pub/configure
@@ -663,6 +663,10 @@ CPPFLAGS
LDFLAGS
CXXFLAGS
CXX
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
am__untar
am__tar
AMTAR
@@ -727,6 +731,7 @@ SHELL'
ac_subst_files=''
ac_user_opts='
enable_option_checking
+enable_silent_rules
enable_dependency_tracking
'
ac_precious_vars='build_alias
@@ -1358,8 +1363,12 @@ Optional Features:
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors
+ --enable-silent-rules less verbose build output (undo: "make V=1")
+ --disable-silent-rules verbose build output (undo: "make V=0")
+ --enable-dependency-tracking
+ do not reject slow dependency extractors
+ --disable-dependency-tracking
+ speeds up one-time build
Some influential environment variables:
CXX C++ compiler command
@@ -2505,7 +2514,7 @@ ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-am__api_version='1.11'
+am__api_version='1.13'
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
@@ -2602,9 +2611,6 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
$as_echo_n "checking whether build environment is sane... " >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
# Reject unsafe characters in $srcdir or the absolute working directory
# name. Accept space and tab only in the latter.
am_lf='
@@ -2615,32 +2621,40 @@ case `pwd` in
esac
case $srcdir in
*[\\\"\#\$\&\'\`$am_lf\ \ ]*)
- as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+ as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
esac
-# Do `set' in a subshell so we don't clobber the current shell's
+# Do 'set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- rm -f conftest.file
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
-alias in your environment" "$LINENO" 5
- fi
-
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
+ alias in your environment" "$LINENO" 5
+ fi
+ if test "$2" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
test "$2" = conftest.file
)
then
@@ -2652,6 +2666,16 @@ Check your system clock" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
test "$program_prefix" != NONE &&
program_transform_name="s&^&$program_prefix&;$program_transform_name"
# Use a double $ so make ignores it.
@@ -2674,12 +2698,12 @@ if test x"${MISSING+set}" != xset; then
esac
fi
# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
else
am_missing_run=
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
fi
if test x"${install_sh}" != xset; then
@@ -2691,10 +2715,10 @@ if test x"${install_sh}" != xset; then
esac
fi
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
+# will honor the 'STRIP' environment variable to overrule this program.
if test "$cross_compiling" != no; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
@@ -2833,12 +2857,6 @@ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
$as_echo "$MKDIR_P" >&6; }
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
- [\\/$]* | ?:[\\/]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
@@ -2921,6 +2939,45 @@ else
fi
rmdir .tst 2>/dev/null
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
if test "`cd $srcdir && pwd`" != "`pwd`"; then
# Use -I$(srcdir) only when $(srcdir) != ., so that make's output
# is not polluted with repeated "-I."
@@ -2971,17 +3028,28 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AMTAR='$${TAR-tar}'
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar pax cpio none'
+
am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
# don't insert GNU blala files
################################################################################
@@ -3513,7 +3581,7 @@ am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
+# Ignore all kinds of additional output from 'make'.
case `$am_make -s -f confmf 2> /dev/null` in #(
*the\ am__doit\ target*)
am__include=include
@@ -3569,8 +3637,8 @@ else
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
rm -rf conftest.dir
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
@@ -3605,16 +3673,16 @@ else
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
am__obj=sub/conftest.${OBJEXT-o}
am__minus_obj="-o $am__obj"
case $depmode in
@@ -3623,8 +3691,8 @@ else
test "$am__universal" = false || continue
;;
nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
if test "x$enable_dependency_tracking" = xyes; then
continue
else
@@ -3632,7 +3700,7 @@ else
fi
;;
msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok `-c -o', but also, the minuso test has
+ # This compiler won't grok '-c -o', but also, the minuso test has
# not run yet. These depmodes are late enough in the game, and
# so weak that their functioning should not be impacted.
am__obj=conftest.${OBJEXT-o}
@@ -4243,8 +4311,8 @@ else
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
rm -rf conftest.dir
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
@@ -4279,16 +4347,16 @@ else
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
am__obj=sub/conftest.${OBJEXT-o}
am__minus_obj="-o $am__obj"
case $depmode in
@@ -4297,8 +4365,8 @@ else
test "$am__universal" = false || continue
;;
nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
if test "x$enable_dependency_tracking" = xyes; then
continue
else
@@ -4306,7 +4374,7 @@ else
fi
;;
msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok `-c -o', but also, the minuso test has
+ # This compiler won't grok '-c -o', but also, the minuso test has
# not run yet. These depmodes are late enough in the game, and
# so weak that their functioning should not be impacted.
am__obj=conftest.${OBJEXT-o}
@@ -7224,6 +7292,14 @@ LIBOBJS=$ac_libobjs
LTLIBOBJS=$ac_ltlibobjs
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
if test -n "$EXEEXT"; then
am__EXEEXT_TRUE=
am__EXEEXT_FALSE='#'
@@ -8438,7 +8514,7 @@ $as_echo "$as_me: executing $ac_file commands" >&6;}
case $ac_file$ac_mode in
"depfiles":C) test x"$AMDEP_TRUE" != x"" || {
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
case $CONFIG_FILES in
@@ -8451,7 +8527,7 @@ $as_echo "$as_me: executing $ac_file commands" >&6;}
# Strip MF so we end up with the name of the file.
mf=`echo "$mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
+ # We used to match only the files named 'Makefile.in', but
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
@@ -8485,21 +8561,19 @@ $as_echo X"$mf" |
continue
fi
# Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
+ # from the Makefile without running 'make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
+ test -z "$am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
# simplest approach to changing $(DEPDIR) to its actual value in the
# expansion.
for file in `sed -n "
s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
fdir=`$as_dirname -- "$file" ||
diff --git a/pub/man/Makefile.in b/pub/man/Makefile.in
index b53f1a113b848df42f447f5465780bf6831e30ee..af9ee75e37598d1947683763af0530206212cd7d 100644
--- a/pub/man/Makefile.in
+++ b/pub/man/Makefile.in
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.13.3 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -16,23 +15,51 @@
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
- test $$am__dry = yes; \
- }
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
@@ -50,7 +77,7 @@ NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = man
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -59,6 +86,18 @@ mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
@@ -98,11 +137,13 @@ am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(auxdir)"
NROFF = nroff
MANS = $(man_MANS)
DATA = $(aux_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
AMTAR = @AMTAR@
AM_CXXFLAGS = @AM_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -298,27 +339,14 @@ uninstall-auxDATA:
@list='$(aux_DATA)'; test -n "$(auxdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(auxdir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
+tags TAGS:
+
+ctags CTAGS:
-ctags: CTAGS
-CTAGS:
+cscope cscopelist:
distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically \`make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -455,17 +483,17 @@ uninstall-man: uninstall-man1
.MAKE: install-am install-strip
-.PHONY: all all-am check check-am clean clean-generic distclean \
- distclean-generic distdir dvi dvi-am html html-am info info-am \
- install install-am install-auxDATA install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-man1 install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am uninstall uninstall-am uninstall-auxDATA \
- uninstall-man uninstall-man1
+.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
+ ctags-am distclean distclean-generic distdir dvi dvi-am html \
+ html-am info info-am install install-am install-auxDATA \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-man1 \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic pdf pdf-am ps ps-am tags-am uninstall \
+ uninstall-am uninstall-auxDATA uninstall-man uninstall-man1
frida.1 : frida.pod
diff --git a/pub/share/Makefile.in b/pub/share/Makefile.in
index 12becccfc7c6b211ba0ebcc9c83d4f3d6dcebde4..cca82549a1f9f53b1c57c580292697c87b0ebfa3 100644
--- a/pub/share/Makefile.in
+++ b/pub/share/Makefile.in
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.13.3 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -16,23 +15,51 @@
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
- test $$am__dry = yes; \
- }
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
@@ -50,7 +77,7 @@ NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = share
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -59,6 +86,18 @@ mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
@@ -95,11 +134,13 @@ am__uninstall_files_from_dir = { \
}
am__installdirs = "$(DESTDIR)$(auxdir)" "$(DESTDIR)$(sysconfdir)"
DATA = $(aux_DATA) $(sysconf_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
AMTAR = @AMTAR@
AM_CXXFLAGS = @AM_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -273,11 +314,11 @@ uninstall-sysconfDATA:
@list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(sysconfdir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
+tags TAGS:
+
+ctags CTAGS:
-ctags: CTAGS
-CTAGS:
+cscope cscopelist:
distdir: $(DISTFILES)
@@ -415,17 +456,17 @@ uninstall-am: uninstall-auxDATA uninstall-sysconfDATA
.MAKE: install-am install-strip
-.PHONY: all all-am check check-am clean clean-generic distclean \
- distclean-generic distdir dvi dvi-am html html-am info info-am \
- install install-am install-auxDATA install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip install-sysconfDATA \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am uninstall uninstall-am uninstall-auxDATA \
- uninstall-sysconfDATA
+.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
+ ctags-am distclean distclean-generic distdir dvi dvi-am html \
+ html-am info info-am install install-am install-auxDATA \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ install-sysconfDATA installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic pdf pdf-am ps ps-am tags-am uninstall \
+ uninstall-am uninstall-auxDATA uninstall-sysconfDATA
# Tell versions [3.59,3.63) of GNU make to not export all variables.
diff --git a/pub/src/Makefile.in b/pub/src/Makefile.in
index b553172a45e9902da6636002754ba97440444e41..8e84b431c2d803281120b693c03a648ef1235c77 100644
--- a/pub/src/Makefile.in
+++ b/pub/src/Makefile.in
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.13.3 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -16,23 +15,51 @@
@SET_MAKE@
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
esac; \
- test $$am__dry = yes; \
- }
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
@@ -51,8 +78,9 @@ PRE_UNINSTALL = :
POST_UNINSTALL = :
bin_PROGRAMS = frida$(EXEEXT)
subdir = src
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in xax_lex.cpp \
- xax_yacc.cpp xax_yacc.h
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am xax_lex.cpp \
+ xax_yacc.hpp xax_yacc.cpp $(top_srcdir)/build-aux/depcomp \
+ $(top_srcdir)/build-aux/ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -75,22 +103,60 @@ am_frida_OBJECTS = axis.$(OBJEXT) calc.$(OBJEXT) commands.$(OBJEXT) \
zentry.$(OBJEXT)
frida_OBJECTS = $(am_frida_OBJECTS)
frida_LDADD = $(LDADD)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+AM_V_CXX = $(am__v_CXX_@AM_V@)
+am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
+am__v_CXX_0 = @echo " CXX " $@;
+am__v_CXX_1 =
CXXLD = $(CXX)
CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
-o $@
+AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
+am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
+am__v_CXXLD_0 = @echo " CXXLD " $@;
+am__v_CXXLD_1 =
LEXCOMPILE = $(LEX) $(AM_LFLAGS) $(LFLAGS)
+AM_V_LEX = $(am__v_LEX_@AM_V@)
+am__v_LEX_ = $(am__v_LEX_@AM_DEFAULT_V@)
+am__v_LEX_0 = @echo " LEX " $@;
+am__v_LEX_1 =
YLWRAP = $(top_srcdir)/build-aux/ylwrap
+am__yacc_c2h = sed -e s/cc$$/hh/ -e s/cpp$$/hpp/ -e s/cxx$$/hxx/ \
+ -e s/c++$$/h++/ -e s/c$$/h/
YACCCOMPILE = $(YACC) $(AM_YFLAGS) $(YFLAGS)
+AM_V_YACC = $(am__v_YACC_@AM_V@)
+am__v_YACC_ = $(am__v_YACC_@AM_DEFAULT_V@)
+am__v_YACC_0 = @echo " YACC " $@;
+am__v_YACC_1 =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo " CC " $@;
+am__v_CC_1 =
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo " CCLD " $@;
+am__v_CCLD_1 =
SOURCES = $(frida_SOURCES)
DIST_SOURCES = $(frida_SOURCES)
am__can_run_installinfo = \
@@ -98,6 +164,23 @@ am__can_run_installinfo = \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
@@ -105,6 +188,7 @@ ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
AMTAR = @AMTAR@
AM_CXXFLAGS = @AM_CXXFLAGS@ -DCONFDIR="\"$(sysconfdir)/frida/\""
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -308,10 +392,11 @@ install-binPROGRAMS: $(bin_PROGRAMS)
fi; \
for p in $$list; do echo "$$p $$p"; done | \
sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p; \
- then echo "$$p"; echo "$$p"; else :; fi; \
+ while read p p1; do if test -f $$p \
+ ; then echo "$$p"; echo "$$p"; else :; fi; \
done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ sed -e 'p;s,.*/,,;n;h' \
+ -e 's|.*|.|' \
-e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
@@ -332,19 +417,21 @@ uninstall-binPROGRAMS:
@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
files=`for p in $$list; do echo "$$p"; done | \
sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
+ -e 's/$$/$(EXEEXT)/' \
+ `; \
test -n "$$list" || exit 0; \
echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(bindir)" && rm -f $$files
clean-binPROGRAMS:
-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-xax_yacc.h: xax_yacc.cpp
+xax_yacc.hpp: xax_yacc.cpp
@if test ! -f $@; then rm -f xax_yacc.cpp; else :; fi
@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) xax_yacc.cpp; else :; fi
+
frida$(EXEEXT): $(frida_OBJECTS) $(frida_DEPENDENCIES) $(EXTRA_frida_DEPENDENCIES)
@rm -f frida$(EXEEXT)
- $(CXXLINK) $(frida_OBJECTS) $(frida_LDADD) $(LIBS)
+ $(AM_V_CXXLD)$(CXXLINK) $(frida_OBJECTS) $(frida_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
@@ -384,45 +471,34 @@ distclean-compile:
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zentry.Po@am__quote@
.cpp.o:
-@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $<
+@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $<
.cpp.obj:
-@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.lpp.cpp:
- $(am__skiplex) $(SHELL) $(YLWRAP) $< $(LEX_OUTPUT_ROOT).c $@ -- $(LEXCOMPILE)
+ $(AM_V_LEX)$(am__skiplex) $(SHELL) $(YLWRAP) $< $(LEX_OUTPUT_ROOT).c $@ -- $(LEXCOMPILE)
.ypp.cpp:
- $(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h $*.h y.output $*.output -- $(YACCCOMPILE)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
+ $(AM_V_YACC)$(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h `echo $@ | $(am__yacc_c2h)` y.output $*.output -- $(YACCCOMPILE)
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ $(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
@@ -434,15 +510,11 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$$unique; \
fi; \
fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
@@ -451,6 +523,21 @@ GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -526,7 +613,7 @@ maintainer-clean-generic:
@echo "it deletes files that may require special tools to rebuild."
-rm -f xax_lex.cpp
-rm -f xax_yacc.cpp
- -rm -f xax_yacc.h
+ -rm -f xax_yacc.hpp
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-am
@@ -599,18 +686,19 @@ uninstall-am: uninstall-binPROGRAMS
.MAKE: all check install install-am install-strip
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
- uninstall-am uninstall-binPROGRAMS
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \
+ clean-binPROGRAMS clean-generic cscopelist-am ctags ctags-am \
+ distclean distclean-compile distclean-generic distclean-tags \
+ distdir dvi dvi-am html html-am info info-am install \
+ install-am install-binPROGRAMS install-data install-data-am \
+ install-dvi install-dvi-am install-exec install-exec-am \
+ install-html install-html-am install-info install-info-am \
+ install-man install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
+ ps ps-am tags tags-am uninstall uninstall-am \
+ uninstall-binPROGRAMS
# AM_LDFLAGS = -l.. no longer needed, all is done by configure.ac